Viconics VCM7000 Installation Guide Manuel d'utilisateur télécharger pdf (Page 3)

VCM7000 Series-Installation Guide3 |

installation

Remove the security screw on the bottom of

Terminal Equipment Controller cover.

• Open unit by pulling on the bottom

side of Terminal Equipment Controller

(g. 1).

• Remove power to the unit by

disconnecting to top left terminal block.

• Ensure power is down by conrming

the local display is not operating.

Module Installation

1. Align module connector and the 2

retaining pins on their respective

insertion points of the controller base.

2. Insert connector and the 2 retaining

pins all at once by pressing on the 3

location simultaneously. (g. 2).

3. Make sure retaining pins are properly

snapped in place.

4. A misalignment of the module

connector while the controller is

powered may permanently damage

the Terminal Equipment Controller or

the communication module

5. Power back the unit by reconnecting

the top left terminal block.

6. Re-install the cover (top side rst)

7. Re-install security screw

Fig. 2

Fig. 1

• Electronic controls are static sensitive devices. Discharge yourself properly

before manipulating and installing the Terminal Equipment Controller.

• A misalignment of the module connector while the controller is powered

may permanently damage the Terminal Equipment Controller or the

communication module.

• All VT(R)7000 series controls are designed for use as operating controls

only and are not safety devices. These instruments have undergone rigorous

tests and verication prior to shipping to ensure proper and reliable operation

in the eld. Whenever a control failure could lead to personal injury and/or

loss of property, it becomes the responsibility of the user / installer / electrical

system designer to incorporate safety devices ( such as relays, ow switches,

thermal protections, etc…) and/or alarm systems to protect the entire system

against such catastrophic failures. Tampering with the devices or unintended

application of the devices will result in a void of warranty.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Viconics VCM7000 Installation Guide Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Viconics VCM7000 Installation Guide