Viconics VCM7000 Installation Guide Manuel d'utilisateur télécharger pdf (Page 2)

VCM7000 Series-Installation Guide2 |

Description

All current “Network Ready” Viconics VT(X)7000 ( 5000 Series ) controllers purchased

after July 2010 are capable of being retrot in the eld with accessory communication

adapters that enables the controllers to be integrated into virtually all leading building

automation system.

This approach allows the exibility to add network communication strategies as bud-

gets allow or as the buildings needs change.

The manufacturing date is identied inside the controller on a small label which also

contains the part number. The format of the date code is year / week. If in doubt,

please contact the factory for assistance. Always verify the manufacturing date code

of all thermostats before ordering any communication modules.

Ex.: VTR7355A5500, date code is 1115 manufactured in

2011 during the 15th week of the year at the beginning of

April.

If required, Network Ready ( Stand-Alone ) Terminal Equipment Controllers can be

eld retrotted with the following communication adapters

Models Available

MODEL DESCRIPTION

VCM7000V5000W Wireless Retrot Communication Card for all VT7000 & VTR7000 Series

VCM7000V50xxP Wireless Retrot Communication Card for all VT7000 & VTR7000 Series

VCM7300V5000B BACnet Retrot Communication Card for all VT7200 & VT7300 Series

VCM7600V5000B BACnet Retrot Communication Card for all VT7600 Series

VCM7607V5000B BACnet Retrot Communication Card for all VT76x7 with RH

VCM7300T5000B BACnet Retrot Communication Card for all VTR7300 Series

VCM7300V5000E Echelon Retrot Communication Card for all VT7200 & VT7300 Series

VCM7600V5000E Echelon Retrot Communication Card for all VT7600 Series

VCM7607V5000E Echelon Retrot Communication Card for all VT76x7 with RH

Network Ready Controller Wireless Network Controller

Wireless Communication Card

1 2 3 4

Pas de commentaire

Viconics VCM7000 Installation Guide Manuel d'utilisateur Page 2